My Geek Finds

Last night a tech from EMC was here to update the Control Station and DART code on our Celerra to enable file system deduplication (more about this later).

As part of this process we had to failover to our standby datamover. Thought these commands might be useful later so here they are.

server_2 – Primary datamover
server_3 – Standby datamover

Fail over to standby mover

# server_standby server_2 -a mover

Faults server_x and renames it to server_2.faulted.server_3
Renames server_3 to server_2
server_3 is now online as server_2

During the time it took to failover I dropped 3 pings to the datamover.

Fall back to primary mover

# server_standby server_2.faulted.server_3 -r mover

Renames standby server to server_3
Renames server_2.faulted.server_3 to server_2
server_2 is now back online as the primary mover.

Again I dropped 3 pings while the datamovers switched.

Here are a couple other useful Celerra commands.

Listing your datamovers and their status from the command line:

# /nas/bin/nas_server -l
id type acl slot groupID state name
1 1 0 2 0 server_2
2 4 0 3 0 server_3

You can get this info from the GUI but this is quick if you are logged into the Control Station CLI.

View the nas version running on your datamovers:

# server_version ALL
server_2 : Product: EMC Celerra File Server Version: T5.6.46.410
server_3 : Product: EMC Celerra File Server Version: T5.6.46.410

Basic stuff but it might be useful to have on hand later.